Set As Homepage     Add To Favorites       ENGLISH | CHINESE
Welcome people to join and create a bright future together!    Welcome to Contact Us

1. Move brake adjuster forward and backward. (Fig.1-a)


2. Check fitting cover plate and anchor bracket fitting is correct.(Fig.1-b)


3. Control arm and anchor bracket fitting status. (Fig.1-c)


4. Check whether pressed section of the cover plate slipped. (Fig.2-a)



5. Grip control arm with a pliers and try to move it, then check whether clamped pressed
location of the cover plate slipped.(Fig.2-b)



6. If cover plate slipped replaced it. (Fig. 2-c)



7. By moving of the brake adjuster forward and backward check clearance. (Fig. 3)



8. Adjust stroke of the push rod as indicated in the figure (Fig.4)



9. Check adjustment torque; replace brake adjuster if the torque found less than 18 Nm (Fig.5)



10. Turn the worm shaft 180° anticlockwise. Let the spanner stay on the hexagon. (Fig.6)
Add:Fengqiao lndustrial Area,ZhujiCity,Zhejiang,China
Tel: 0086-575-87628536
Fax: 0086-575-87422272
The brake is driven with air. The air filled in the brake blower activates the blower. More >>
Can be download catalogue, wallpaper, intruction inserts & videos and interactive Cd documents More >>


Design by PaiXu net
Home   |    Company   |    Products & Services   |    News   |    Media   |    Contact Us